Computer Windows update, posted by Ronic Chiche at ThomX igloo about software
|
as our computer is not only on the local network but is also connected to the internet, I did an update this morning.
=> computer restart and remote connexion are OK. |
|
Changing Icepap parameters, posted by Ronic Chiche at ThomX igloo about software
|
in a command window : connect to CC client
ssh -XY kevin.dupraz@client-cc
pwd : thomx2022 |
Changing Icepap parameters, posted by Ronic Chiche at ThomX igloo about software
|
for P4z, the nominal current has been set to 0.5A several weeks ago.
and today, I set it to 0.3A, like P1z, because sometime I observed a too strong steering.
Ronic |
Remote control, posted by Ronic Chiche at ThomX igloo about software 
|
Description of the present remote control of the FP-cavity instruments:
In the control room, one can access any thomX computer using this account:
login : operateur.thomx |
|
Remote control, posted by Ronic Chiche at ThomX igloo about software
|
2 remotely controlled elements have been added : both of them are connected to our ethernet switch
- 192.168.1.60 : Basler Camera, to be used and configured with the Pylon software
- 192.168.1.70 : Home-made Onefive laser peltier controller using an Arduino+ethernet shield. the software has been developped by Sebastien Pitrel |
|
Remote control, posted by Ronic Chiche at ThomX igloo about software
|
- 192.168.1.90 : second Tektronix DPO4104 scope
- the IP9258 power AC switch, port 3 is connected to the Gentec-EO power meter power supply
Ronic |
|
Remote control, posted by Ronic Chiche at ThomX igloo about software
|
- 192.168.1.101 : power supply for the amplifier of the 500MHz beating => MANDATORY to use the proprietary software EasyPower (icon on the office)
to remotely control the power supply.
Ronic |
|
Remote control, posted by Ronic Chiche at ThomX igloo about software
|
New password:
once connected to the remote computer (192.168.229.29)
look at the "2nd window" image file to enter the account information: |
|
Remote control, posted by Ronic Chiche at ThomX igloo about software
|
New password changed today:
once connected to the remote computer (192.168.229.29)
look at the "2nd window" image file to enter the account information: |
|
several software tools information, posted by Ronic Chiche at ThomX igloo about software
|
- For placing the FLUO screen in the X-ray beam
use Jive -> Device -> XLI/OP/FLS.01 to launch the relative AtkPanel
click on "Inserted" |
|
several software tools information, posted by Ronic Chiche at ThomX igloo about software
|
there are 2 news python scripts in /tmp_mnt/data/shared/commissioning/Common directrory:
- Read_Phase_Rigol_33MHz :
it reads both channels phase. |
|
several software tools information, posted by Ronic Chiche at ThomX igloo about software
|
Atk panel for changing the phase of the CFP / 500MHz RF frequencies is in :
Jive => "devices" => ER/CA/RAC.05-API.A01 => Phase CFP 500MHz
Atk panel for reading the pico-ampermeter i1-i4 : |
|
CEM issue impacting the communication with Smaract laser motors and Alphanov laser amplifier, posted by Ronic Chiche at ThomX igloo about cabling | software
|
this morning, we saw that the injection kicker produces some CEM issues on all the machine and also on the USB communication with the PC.
in that case, one needs to reset the USB communication.
one can either restart the PC (which is quite long to restart all the softwares) or just unplug and replug the corresponding USB connector on |
|
Possible automatisation process, posted by Ronic Chiche at ThomX igloo about software
|
I found a way in Labview Signal Express to record some measurement values of a signals into a file :
"Ajouter un étape" => "charger/enregistrer des signaux" => "signaux analogiques" => "enregistrer
au format ASCII/LVM" |
|
MPS IP laser shutter command, posted by Ronic Chiche at ThomX igloo about software
|
the IP laser shutter receive a permit from both the MPS and the PSS.
if the MPS permit is not granted (RED), one needs to check if the jive panel is not blocking it.
go to : |
|
FP cavity Remote Control , posted by Manar Amer at ThomX igloo about mechanics | lasers and optics | detectors and electronics | software
|
The control of ThomX Fabry Perrot cavity is done through the remote access of the PC placed inside the casemate using "Remote Desktop"
We can access each parameter using its own software:
Cavity Mirror Motors : ThomX software |
|
Oscilloscopes control room panel, posted by Ronic Chiche at Optical room about software
|
today with Philippe Gauron and Olivier Neuveu, we tested the control room TANGO panel for the oscilloscopes.
the ThomX IP addresses of the scopes will be : 192.168.229.27 and 192.168.229.28
this panel allow ONLY to read a measurement of the amplitude of the channels 1, 2 and 3 (laser power, cavity transmission and reflection) of |
|
LaseLock control room Panel, posted by Ronic Chiche at Optical room about software
|
today, with Philippe Gauron and Olivier Neuveu, we tested the remote control of the LaseLock.
the laselock device has the ThomX IP address : 192.168.229.154
and the ThomX network name : laselock1.thomx.fr |
|
Valves of the mirror chambers, posted by Manar Amer at ThomX igloo about vacuum | software | utilities
|
Vacuum group: The electronics and air pressure to control the valves is connected to the control room.
They can be opened using a software in the control room named "Jiva" (it controls all the components in ThomX)
steps to operate : |
|
User manuel of the software for controlling motors, posted by Ronic Chiche at Optical room about software
|
I include the user manuel written by Didier in which I added a special page to overcome the tricky password system of the controlling software for FP-cavity
motors, PDH optical gain control motors and injection motors. |