today, with Philippe Gauron and Olivier Neuveu, we tested the remote control of the LaseLock.

the laselock device has the ThomX IP address : 192.168.229.154
and the ThomX network name : laselock1.thomx.fr

- In TANGO, one has to launch the ATK-PANEL
the panel has ONLY the status ON/OFF of the two regulation channels A & B
one cannot control anything nor even start the regulation ! it is just a monitoring panel.

- In a local Computer, one has to use Lantronix DeviceInstaller and CPR_manager to make the COM port setup.
(one has to translate the IP connection to a COM connection for the PC).
after the connection setup is done, one has to use the TEM Kangoo software to remotely control the Laselock.
(one can control all the LaseLock parameters with TEM Kangoo).

the Laselock CANNOT be connected to 2 different controllers (for example TANGO in control room or a local PC) !
one has to switch off the device server in TANGO or the COM connection on the local PC before being able to connect any other controller.