Description of the present remote control of the FP-cavity instruments:

• In the control room, one can access any thomX computer using this account:
  login : operateur.thomx
  pwd  : thomX202
   
• once logged on the computer,
  go to the "internet" section of the softwares
  and launch the Remote Deskop Control software
  look at the "1st window" image file to enter the remote control parameters
   
• once connected to the remote computer (192.168.229.29)
  look at the "2nd window" image file to enter the account information:
  login: $jehanno
  pwd: ThomX2345
  domain: pc-thomx2
   
• once logged to the remote computer,
  you can check the instruments connected to the local network : 192.168.1.1 - 255 by using the IP scanner on the desktop.
  see the "instruments" image to have the full list of IP adresses:
  192.168.1.1 : this computer has 2 ethernet cards, one on the ThomX network (192.168.229.29) and one the local instruments network (192.168.1.1)
  192.168.1.2 : the Netgear ethernet switch (on which all instruments are connected) address, accessible by its web server on port 80 (pwd:password)
  192.168.1.8 : the IP9258 power AC switch, accessible by its web server on port 80 (login: admin / pwd:12345678)
                        port 1 is connected to the Onefive Smaract motors (Frep and CEP)
                        port 2 is connected to the Laselock
  192.168.1.10: Smaract motors controller, accessible by its dedicated Precision Tool Commander software directly on its ethernet address
  192.168.1.20: Laselock controller, accessible by its dedicated Kangoo software on the virtual port COM 20
  192.168.1.30: Tektronix DPO4054 oscillorscope, accessible by its dedicated labwindowsCVI Signal ExpressTektronix Edition software on its ethernet address
                         or by its web server on port 80                                                  
  192.168.1.40: Gentec-EO power meter, accessible by its dedicated S-link software directly on the virtual port COM 13
  192.168.1.50: Rigol DG4162 arbitrary waveform generator. no dedicated software up to now => to be done
  192.168.1.86-87-88: FP-cavity motors controllers, accessible by their Jehanno "Chassis1-2" and "Chassis3" dedicated software directly on their ethernet address