ND, IC, VK, VM; Optimisation LE 
|
15h Scan extraction kicker vs EL/BPM.01.
See attached plots.
Some interferences with ring storage. |
|
IC, VK, VM, ND; 10x
|
08h25 Start ThomX: Modulator, Frigo, cycling all magnets
08h30 Start chillers
10h00 HV is 'On' |
|
KD MJ VC HG; shift du 14 janvier 2025
|
7h50 : mise en chauffe machine à distance (chiller, frigo, modulateur, laser)
9h15 re demarrage du serveur LI/OP/LAS.02 => External_trigger_multi
redemarrage serveur feedback laser astor/salle control/client5/ThomX_Photocathode |
|
MJ KD VC HG; shift du 15 janvier 2025 7x
|
8h15 : mise en chauffe de la machine à distance (modulateur, laser, frigo, chiller)
faisceau Linac et TL non déviée => manip pour la comphéension des sauts.
Pos laser H4.374 V3.36 |
|
VM, IC, VK; 10x
|
08h25 Start ThomX: Modulator, frigo
08h35 Start chilers, laser, cycling all magnets
10h05 HV is 'On' |
|
MV, IC, VK; 16x
|
08h43 Start ThomX: Modulator, frigo, laser, cycling all magnets
08h50 Chillers started
09h52 HV is 'On' |
|
KD; shift du 21 janvier 2025
|
| 8h10 : mise en chauffe à distance (modulateur, laser, frigo/chiller) |
|
MV, IC, VK, RC;
|
08h41 Start Thomx: Modulator, Frigo, Laser
08h46 Start chillers, all magnets sycling
09h50 Start RF |
|
MV, IC, VK, RC;
|
08h45 Start Thomx: Modulator, frigo, laser
08h50 Start chillers, cycling all magnets
Vacuum intervention, beam pipe closed. Vacuum OK to start (11.23) |
|
MV, IC, VK, RC;
|
08h45 Start Thomx: Modulator, frigo, laser
08h50 Start chillers, cycling all magnets
Vacuum intervention, beam pipe closed. Vacuum OK to start (11.23) |
|
ND, VC, HG, MJ; Test demarrage 10/02 7x
|
9:37 Mise en chauffe
Maher signal que des tests ont ete fait sur le canon, leger risque de claquage.
Pression SF6: 2938mbar |
|
ND, Marie Labat; Streak camera
|
9:20 Start aligning
12:40 Alignement done for both linac and ring.
Health check: Archiving not working |
|
KD MJ; shift du 12 février 2025 - Alignements
|
8h: mise en chauffe à distance (modulateur, frigo, chiller, laser)
9h30: laser semble pas aligné dans l'iris avec une forme assez étrange (trou au centre) ==> énergie sortie laser
PC 270uJ |
|
ND, SC, Marie Labat, IC, VM; Opérations caméra à balayage / MRSV 20x
|
8h50 Mise en chauffe modulateur
Changement de la carte mère pour la badgeuse de la ligne X
31.2degres, toujours dAlignement laser dans la casemate |
|
Entered by Super Team from 134.158.195.141 on Fri Feb 14 08:21:09 2025;
|
08h20 Start ThomX: modulator, laser, fridge,cycling all magnets
08h25 chillers are started
09h50 Controlled access (Rhonic) |
|
VM, IC, VK; 70 MeV WP
|
10h30 Start beam
Since Friday evening the problem to store the beam at 70 MeV. There is 1 turn only. Probably some subsystem failure. At this moment the reason
is not found. Help is needed: synchronization/Diag/Magnets. |
|
VC, KD, VM, ND, RC, MJ; shift
|
demarrage machine 8h30
intervention Kicker.. 8h45
10H30 fin intervention Kicker Ok |
|
Entered by Super Team from 134.158.195.141 on Wed Feb 19 08:27:57 2025;
|
08h26 Start ThomX: Modulator, Fridge, Laser
08h32 Chillers were started, cycling all magnets
11H changement de la carte synchro... Carte synchro opérationnel |
|
Entered by Super Team from 134.158.195.141 on Thu Feb 20 08:24:55 2025; 6x
|
08h25 Start ThomX; Start ThomX: Modulator, Fridge, Laser
08h32 Chillers were started, cycling all magnets
11h23 HV is 'On' |
|
shift crew; shift du 21 février 2025 6x
|
8h30 : démarrage machine en remote (modulateur, laser, chiller/frigo, cyclage)
Nouveau pb : variation du flux X lente
incomprehensible car cavite lockee et electrons stockes. |
|