HOME SBOX THOMX MINICAV Utilities

MINICAV orders MINICAV installation MINICAV commissioning MINICAV control command

Status of commissioning, report also here plots are reports., Page 5 of 5  Not logged in

Find |  Login |  Help

Full | Summary | Threaded     89 Entries

Goto page Previous  1, 2, 3, 4, 5   All

ID Date Author Status Type Category Location Title Text   24   Mon Oct 4 14:57:04 2021 Aurélien Martens Fixed info detectors and electronics | software Optical room ip adress of smaract driver the ip adress of the smaract driver is now 10.0.53.10:5000 please think about putting such      25   Mon Oct 4 15:10:17 2021 Aurélien Martens Fixed report mechanics | detectors and electronics | software Optical room new position of smaract motors following the measuremetn at 879.9 MHZ of the laser theoptical cavity length has been adjusted to that value from 876MHz setting      26   Mon Oct 4 15:24:14 2021 Aurélien Martens Fixed report lasers and optics | detectors and electronics Optical room piezo actuation range A 10V applied on the laser piezo was found to induce a frequecny change of about 5kHz, compatible with expectations from the piezo      27   Mon Oct 4 15:38:43 2021 Aurélien Martens Fixed info detectors and electronics Optical room phone is noise doing the sensitivty measurement of the piezo we observed satellite peaks around 800 to 900 Mhz. Removing the phones from      28   Tue Oct 5 11:35:16 2021 Aurélien Martens Fixed report detectors and electronics | software Optical room new position of smaract motors a cavity length measurement gave 880.9Mhz. The m1/M2 have been put to +5.1000mm both M3/M4 srill at -2.9mm      29   Tue Oct 5 12:18:34 2021 Aurélien Martens Fixed report detectors and electronics | software Optical room new position of smaract motors to find the fundamental mode we moved the cavity mirrors to new positions: +5.104mm for both planar mirrors      30   Tue Oct 5 12:23:51 2021 Aurélien Martens Fixed report detectors and electronics | software Optical room new position of smaract motors the M1 is not at 5.1045mm to put the fundamental on the scanning range of the laser piezo M2 still at 5.104mm      31   Tue Oct 5 16:23:04 2021 Aurélien Martens Fixed report detectors and electronics | software Optical room new position of smaract motors after 3hours (1pm --> 4pm) the cavity moved by 12um in total new positions: +5.1065mm on M1      43   Thu Dec 2 16:12:17 2021 Aurélien Martens Fixed report mechanics | software Optical room new smaract positions M1 and M2 at 5.1085mm and M3 and M4 at -2.9mm

Goto page Previous  1, 2, 3, 4, 5   All

ELOG V3.1.4-395e101