| ID |
Date |
Author |
Status |
Type |
Category |
Important |
Subject |
Icon |
|
137
|
Thu Oct 28 16:40:39 2021 |
Entered by sophie chance from 134.158.195.141 on Thu Oct 28 16:40:25 2021 | Under Process | Linac | Linac Commissionning |
|
10 Hz | |
Passage à 10 Hz, Augmentation progressive de la bobine
Attenuation canon à 3 dB |
|
138
|
Thu Oct 28 17:07:46 2021 |
Entered by sophie chance from 134.158.195.141 on Thu Oct 28 17:07:32 2021 | Under Process | Linac | Linac Commissionning |
|
Interlock sur PP1 en augmentant l'intensité de COL02 à 10 Hz | |
Malgré attenuation 3 dB, à 10 Hz, interlock régulier en montant la valeur d'Ampérage de la bobine col02 sur PP1. Valeur limitée pour l'instant à 50A.
Il y a une decade de décalage entre jauge et pompe. |
|
139
|
Thu Oct 28 17:13:35 2021 |
Entered by sophie chance from 134.158.195.141 on Thu Oct 28 17:13:21 2021 | Under Process | Linac | Diag |
|
BPMs | |
Passage à 1 Hz pour transport faisceau avec bobine de foc pour test sur les BPMs en bougeant les steerers |
|
140
|
Thu Oct 28 17:25:53 2021 |
Entered by sophie chance from 134.158.195.141 on Thu Oct 28 17:25:40 2021 | Fixed | Info | Vide |
|
Pompe PP1 | |
Lorsqu'il y a une coupure de courant la pompe PP1 remet une valeur d'interlock par défaut qui n'avait pas été modifié
Jean-Noel et les personnes du vide ont modifié ce seuil
A 3 dB, 100A, passage à 10 Hz sans problèmes avec le changement de seuil d'interlock de PP1
Passage à 0.25 dB par palier, I = 100A , 10 Hz |
|
141
|
Thu Oct 28 17:36:27 2021 |
Entered by sophie chance from 134.158.195.141 on Thu Oct 28 17:36:11 2021 | Fixed | Linac | Linac Commissionning |
|
Faisceau 10 Hz | |
Bobine de foc I = 170A, 10 Hz, image sortie canon jointe
Estimation de la charge : Q = 50 - 60 pC
2 interlocks inexpliqués |
| Attachment 1: 2021-10-28_17_51_59_li_dg_sst_01-ccd_01_faisceau_10Hz_170A_RAW.png
|
 |
|
142
|
Fri Oct 29 10:51:38 2021 |
Entered by Moutardier Alexandre from 134.158.195.144 on Fri Oct 29 10:51:23 2021 | Not Fixed | Problem | Linac Commissionning |
|
Problème Modulateur | |
Un interlock modulateur tombe a chaque fois avant que la chauffe ne soit fini.
Maher doit recontater le fabricant et essaye de regler le problème.
En attendant on ne peut rien faire. |
|
143
|
Fri Oct 29 11:19:51 2021 |
Entered by sophie chance from 134.158.89.243 on Fri Oct 29 11:19:37 2021 | Under Process | Problem | Linac Commissionning |
|
Problème modulateur | |
Scandinova a été contacté, pas de retour pour l'instant.
Harware reset pour voir si cela améliore les choses pour la suite de la journée en attendant la réponse de scandinova
En chauffe pour l'instant. |
|
144
|
Fri Oct 29 13:32:18 2021 |
Entered by sophie chance from 134.158.195.142 on Fri Oct 29 13:32:05 2021 | Under Process | Info | Linac Commissionning |
|
Mise en route du faisceau | |
Le modulateur est en route, nous nous replacons à la même position qu'hier 0.25dB attenuation, 10 Hz, attenuation section à 27 dB, observation sur SST.01 après canon
Interlock à partir de 160 A sur le vide, charge à environ 40 pC qui correspond plutot à un presque maximum d'énergie pour une phase de 263 degres (I = 160 A) |
|
145
|
Fri Oct 29 13:57:49 2021 |
Entered by sophie chance from 134.158.195.142 on Fri Oct 29 13:57:22 2021 | Under Process | Linac | Linac Commissionning |
|
Passage section | |
Le faisceau a passé la section
STR01-V01 = -1.10, STR01-H01 = -1.90
Ifoc = 150A, phase 263, 1.5 dB section, 0.25 dB canon
|
| Attachment 1: Passage_section_291021.png
|
 |
|
146
|
Fri Oct 29 15:53:12 2021 |
Entered by sophie chance from 134.158.195.142 on Fri Oct 29 15:52:55 2021 | Fixed | Info | Linac Commissionning |
|
Arrêt faisceau | |
Arrêt modulateur, arrêt faisceau |
|
Draft
|
Fri Oct 29 15:56:01 2021 |
Entered by Super Team from 134.158.195.142 on Fri Oct 29 15:55:48 2021 | Under Process | Question | |
|
Erreur DS CALC | |
alexandre.moutardier@client3:~/git/panneaux/PlateformeIHMThomX$ ****************************** motor_position 0 1.0 1
jiji 406.6361292814322
****************************** motor_position 0 3.25 1
jiji 706.627460299649
****************************** motor_position 0 3.0 1
jiji 683.2899425352272
****************************** motor_position 0 1.25 1
jiji 459.5732341444216
****************************** motor_position 0 1.25 1
jiji 459.5732341444216
*****Error set attenuatation value ***** motor_position 0 1.25 1
Error set attenuatation value 459.5732341444216
****************************** motor_position 0 0.25 1
jiji 195.89278026310274
****************************** motor_position 1 10.0 1
jiji 1101.9935039664515
****************************** motor_position 1 5.0 1
jiji 860.9899259598128
****************************** motor_position 1 1.5 1
jiji 505.4962801007356
****************************** motor_position 0 0.5 1
jiji 285.54820384824495
****************************** motor_position 0 0.75 1
jiji 348.5528535034814
*****Error set attenuatation value ***** motor_position 0 0.75 1
Error set attenuatation value 348.5528535034814
****************************** motor_position 0 0.25 1
jiji 195.89278026310274
*****Error set attenuatation value ***** motor_position 0 0.25 1
Error set attenuatation value 195.89278026310274
alexandre.moutardier@client3:~/git/panneaux/PlateformeIHMThomX$ ****************************** motor_position 0 0.5 1
jiji 285.54820384824495
****************************** motor_position 0 0.5 1
jiji 285.54820384824495
****************************** motor_position 0 0.75 1
jiji 348.5528535034814
****************************** motor_position 0 0.75 1
jiji 348.5528535034814
*****Error set attenuatation value ***** motor_position 0 0.75 1
Error set attenuatation value 348.5528535034814
****************************** motor_position 0 1.0 1
jiji 406.6361292814322
*****Error set attenuatation value ***** motor_position 0 1.0 1
Error set attenuatation value 406.6361292814322
****************************** motor_position 0 1.0 1
jiji 406.6361292814322
*****Error set attenuatation value ***** motor_position 0 1.0 1
Error set attenuatation value 406.6361292814322
****************************** motor_position 0 1.25 1
jiji 459.5732341444216
*****Error set attenuatation value ***** motor_position 0 1.25 1
Error set attenuatation value 459.5732341444216
|
|
148
|
Fri Oct 29 15:58:58 2021 |
Entered by Super Team from 134.158.195.142 on Fri Oct 29 15:58:45 2021 | Not Fixed | Linac | Linac Commissionning |
|
Erreur DS CALC sur terminal | |
Message apparu dans un terminal après avoir lancé ipython create_DS_Att_Deph_write.py
Le moteur sur l'IHM RF ne bouge plus (mais bouge sur ATKPanel) pour la partie canon (bouton reste bleu et valeur fixée de LI/HFI/Att.02-MOT.01/Position à 475 quelquesoit les dB)
alexandre.moutardier@client3:~/git/panneaux/PlateformeIHMThomX$ ****************************** motor_position 0 1.0 1
jiji 406.6361292814322
****************************** motor_position 0 3.25 1
jiji 706.627460299649
****************************** motor_position 0 3.0 1
jiji 683.2899425352272
****************************** motor_position 0 1.25 1
jiji 459.5732341444216
****************************** motor_position 0 1.25 1
jiji 459.5732341444216
*****Error set attenuatation value ***** motor_position 0 1.25 1
Error set attenuatation value 459.5732341444216
****************************** motor_position 0 0.25 1
jiji 195.89278026310274
****************************** motor_position 1 10.0 1
jiji 1101.9935039664515
****************************** motor_position 1 5.0 1
jiji 860.9899259598128
****************************** motor_position 1 1.5 1
jiji 505.4962801007356
****************************** motor_position 0 0.5 1
jiji 285.54820384824495
****************************** motor_position 0 0.75 1
jiji 348.5528535034814
*****Error set attenuatation value ***** motor_position 0 0.75 1
Error set attenuatation value 348.5528535034814
****************************** motor_position 0 0.25 1
jiji 195.89278026310274
*****Error set attenuatation value ***** motor_position 0 0.25 1
Error set attenuatation value 195.89278026310274
alexandre.moutardier@client3:~/git/panneaux/PlateformeIHMThomX$ ****************************** motor_position 0 0.5 1
jiji 285.54820384824495
****************************** motor_position 0 0.5 1
jiji 285.54820384824495
****************************** motor_position 0 0.75 1
jiji 348.5528535034814
****************************** motor_position 0 0.75 1
jiji 348.5528535034814
*****Error set attenuatation value ***** motor_position 0 0.75 1
Error set attenuatation value 348.5528535034814
****************************** motor_position 0 1.0 1
jiji 406.6361292814322
*****Error set attenuatation value ***** motor_position 0 1.0 1
Error set attenuatation value 406.6361292814322
****************************** motor_position 0 1.0 1
jiji 406.6361292814322
*****Error set attenuatation value ***** motor_position 0 1.0 1
Error set attenuatation value 406.6361292814322
****************************** motor_position 0 1.25 1
jiji 459.5732341444216
*****Error set attenuatation value ***** motor_position 0 1.25 1
Error set attenuatation value 459.5732341444216
|
|
151
|
Mon Nov 8 09:21:48 2021 |
Entered by sophie chance from 134.158.195.141 on Mon Nov 8 09:21:32 2021 | Under Process | Info | Diag | Aimants | CC | Infra | Laser | Opt | RF D1 | RF Anneau | MECA | SY | Vide | Electronique | Linac Commissionning |
|
Etat des lieux | |
SC et AM
Fermeture des sous-sols et de la crinoline
Login sur les clients 1 et 2 sur le compte opérateur ThomX.
Problème avec le démarrage de Plateforme IHM qui ne s'ouvre pas, en cours de résolution |
|
152
|
Mon Nov 8 09:31:04 2021 |
Entered by sophie chance from 134.158.195.141 on Mon Nov 8 09:30:51 2021 | Under Process | Question | Linac Commissionning |
|
Modulateur | |
Un panneau attention est affiché sur le modulateur, Mise en chauffe quand meme pour tests.
Le panneau attention disparait à la mise en chauffe |
|
153
|
Mon Nov 8 10:28:52 2021 |
Entered by sophie chance from 134.158.195.141 on Mon Nov 8 10:28:35 2021 | Under Process | Info | Linac Commissionning |
|
Zone de stockage | |
Le rondier de la zone de stockage est désactivé. C'est une zone à laquelle nous n'avons pas accès.
Une demande au SPR a été faite. |
|
154
|
Mon Nov 8 12:16:13 2021 |
Entered by sophie chance from 134.158.195.141 on Mon Nov 8 12:15:59 2021 | | Linac | Laser |
|
energie laser | |
Mesure de 12 uJ avant hublot |
|
155
|
Mon Nov 8 12:44:47 2021 |
Entered by sophie chance from 134.158.195.141 on Mon Nov 8 12:44:33 2021 | Under Process | Shift summary | Linac Commissionning |
|
transport faisceau | |
Personnes : SC, CB,
visu du faisceau sur le premier écran. La visu est différente d'avant l'intervention sur la jauge (faisceau situé plus bas). En focalisant avec le solenoides, nous avons maintenant le faisceau photoemis et le courant d'obscurité. Les steerers sont à zéro, phase 24 degrés, atténateur canon 1 db, atténuateur section 1 dB, modulateur 1050kV. Imaage sauvée à 12h40. On passe la section. On le voit sans steerers. On a l'impression qu'il reste tout de meme un kick,mais Il faut recadrer la caméra pour voir tout l'écran.
Les wavecatchers ne fonctionnent pas. Il faut travailler l'alignement cette après midi.
Le modulateur est mis en HV pour une redémarrage rapide en début d'après midi.
On redémarrage dans l'après midi. Le faisceau est retrouvé après un petit réglage des phases.
Je passe la main à Nicolas pour les TP GI, et Emmanuel pour l'alignement laser+ solenos
|
|
157
|
Mon Nov 8 18:01:06 2021 |
Entered by Moutardier Alexandre from 134.158.195.144 on Mon Nov 8 18:00:52 2021 | | Info | Diag | Linac Commissionning |
|
Scan charge phase | |
Scan charge ICT linac phase canon fait le 08 Nov 2021
Scan tous les degrés, 10 mesure de charges pars point de 150 à 360 degrés.
(script : $HOME_IHM//mesure_charge_from_raw.py
commande : ipython mesure_charge_from_raw.py 150 360 1 10 li) |
| Attachment 1: scan_charge_phase_08-11-2021.png
|
 |
|
158
|
Tue Nov 9 09:12:28 2021 |
Entered by sophie chance from 134.158.195.141 on Tue Nov 9 09:12:14 2021 | Under Process | Info | Linac Commissionning |
|
démarrage | |
Démarrage modulateur, temps restant 3590 s environ
Acces casemate prévu pour Iryna et Slava avant faisceau |
|
159
|
Tue Nov 9 11:25:33 2021 |
Entered by sophie chance from 134.158.195.141 on Tue Nov 9 11:25:18 2021 | | Info | Linac Commissionning |
|
Faisceau et scan charge phase | |
Faisceau jusqu'à sortie section reproductible depuis hier, pas de steerer observation sur caméra sortie section avec phase section = 1950 steps et COL02 = 160A et COL01 = 0.0A
Travail sur les BLMs en cours, Accès demandé
|
| Attachment 1: 2021-11-9_11_24_24_scan_charge_phase.jpg
|
 |