HOME Prise de donnees MML Controle commande Simulations Notes Hardware Ligne X Laser Interaction Diagnostiques Synchronisation
Commissionning Commissionning Preparation Pannes ShiftCheck
  Toutes les notes concernant les Commissionning de ThomX  Not logged in ThomX    logo
This is a draft message, edit and submit it to make it permanent  
Message ID: 1145     Entry time: Wed Nov 5 12:50:55 2025
 Author: Entered by Super Team from 134.158.195.141 on Wed Nov 5 12:50:37 2025 
 Status:  
 Type:  
 Category:  
 Important:
 Subject:  
 Icon:  

Matin :

Soucis synchro :
- Nicolas les a redémarré
- kevin est vebu vérifier la synchro du laser, le signal du 500 Mega un peu faible (à vérifer)
- toujours des coups perdus

Soucis Alims :
Dipole --> 250A impossible de forcer 159.3
- currentSetpointPM=159.3
- currentSetpoint=250=Current ...
Ds passé en erreur. Ok L'alim était en local ....

Soucis phase section :
Problem with  calc/li_hfi/write_dep.01-mot.01 does not work.

To change section phase li/hfi/dep.01-mot.01 was used

18h08 Unable to get low energy spread on TL sst2. It seems we observed a scattered beam.

18h15 Gave up. Stop ThomX

Attachment 1: Screenshot_from_2025-11-05_17-49-33.png  38 kB  Uploaded Thu Nov 6 08:56:31 2025  | Hide | Hide all | Show all
Screenshot_from_2025-11-05_17-49-33.png
Attachment 2: Screenshot_from_2025-11-05_17-51-14.png  544 kB  Uploaded Thu Nov 6 08:56:49 2025  | Show | Hide all | Show all
Attachment 3: Screenshot_from_2025-11-05_17-50-44.png  466 kB  Uploaded Thu Nov 6 08:57:14 2025  | Hide | Hide all | Show all
Screenshot_from_2025-11-05_17-50-44.png
ELOG V3.1.4-395e101