HOME SBOX THOMX MINICAV Utilities
THOMX orders THOMX installation THOMX commissioning THOMX control command
  Status of installation, including shipping and de-installation of test setups.  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry   Chiller installation + interlock, posted by Ronic Chiche at ThomX igloo about mechanics 
    Reply   Chiller installation + interlock, posted by Ronic Chiche at ThomX igloo about mechanics IMG_20220309_093541.pngChiller_Sub-d15_pinout.jpg
       Reply   Chiller installation + interlock, posted by Ronic Chiche at ThomX igloo about mechanics 
Message ID: 43     Entry time: Wed Mar 9 10:51:59 2022     In reply to: 42     Reply to this: 44
 Author: Ronic Chiche 
 Status: Fixed 
 Type: info 
 Category: mechanics 
 Location: ThomX igloo 
 Title: Chiller installation + interlock 

- this morning the chiller leakage has been fixed by adding some Teflon on the faulty Swagelock adapter.
a long leakage test has to be done to be sure there is no leakage at all => can be done on Friday during our tests.

- here is a picture of the 2 Alphanov amplifier controller interlocks.
I2 has to be connected to the Sub-D15 connector of the SMC HECR008 chiller

Ronic Chiche wrote:

- this morning with Aurélien, we filled the water tank of the chiller and we opened the water valves (last pipes on water arrival/departure panel).

there is no leakage on the external water circuit but there is a small one on one of the Swagelock adapters of the water circuit connected to the Alphanov Amplifier.
we will add some Teflon to remove the leakage.

- the chiller alarm can be connected to the interlock detection of the Alphanov amplifier (I2 connector).
we will have a closer look at the different connectors next time, as the Alphanov manual is not very clear on how to connect them together.

 

Attachment 1: IMG_20220309_093541.png  287 kB  | Show | Hide all | Show all
Attachment 2: Chiller_Sub-d15_pinout.jpg  99 kB  | Hide | Hide all | Show all
Chiller_Sub-d15_pinout.jpg
ELOG V3.1.4-395e101