HOME SBOX THOMX MINICAV Utilities
THOMX orders THOMX installation THOMX commissioning THOMX control command
  Status of commissioning, report also here plots are reports.  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry   Motors Z axis reversed, posted by Loïc Amoudry at Optical room about mechanics 
    Reply   Motors Z axis reversed, posted by Loïc Amoudry at Optical room about mechanics 
Message ID: 19     Entry time: Tue Mar 19 17:01:52 2019     Reply to this: 23
 Author: Loïc Amoudry 
 Status: Fixed 
 Type: issue 
 Category: mechanics 
 Location: Optical room 
 Title: Motors Z axis reversed 

S2 and S3 z-axis are initially at 1/4 (5mm/20mm) of there range over ~20mm range. This is meant to be able to spread them up to ~15mm in case of thermal effect.

Actually, they are in an opposite position. Means that they can only be spread of 5mm from the initial position.

ELOG V3.1.4-395e101