|
HOME
SBOX
THOMX
MINICAV
Utilities
|
|
MINICAV orders
MINICAV installation
MINICAV commissioning
MINICAV control command
|
| Status of installation, including shipping and de-installation of test setups. |
Not logged in |
 |
|
|
|
|
|
Message ID: 9
Entry time: Tue Mar 23 14:36:01 2021
In reply to: 8
|
|
|
Throughout all the range of motion for the motors
-→ no problem with the mirrors close together (M1-M3 and M2-M4) hitting each other.
-⇾ the problem with the pinholes hitting each other was fixed by trimming their edges a little, no issue for M1-M3 and M2-M4 now.
| Manar Amer wrote: |
|
The mirrors were placed in the wrong orientation, it was adjusted correctly
but the issue of having the mirrors/irises hitting each other was still there.
The motors need to be moved in the longitudinal position to avoid this issue.
| Manar Amer wrote: |
|
As shown in the image attached when placing the mirror mounts (or irises) of the very close mirrors on the mounts they hit each other.
The motor's location needs to be changed for them not to hit each other (pushed a little to the back or the front)
This restricts the motion of the motors later on.
Not sure if this was the case before changing the plate or only after
|
|
|
|
|
|
|
|
|
|
|
|
|