HOME SBOX THOMX MINICAV Utilities
MINICAV orders MINICAV installation MINICAV commissioning MINICAV control command
  Informations related to control-command., Page 1 of 1  Not logged in ELOG logo
 Find |  Login |  Help 
 Full | Summary | Threaded | Collapse | Expand  Show only new entries   2 Entries 
Entry   Temperature Regulation , posted by Manar Amer at Other about software 202122004_Tempurature_Curve_Minicav_at_10h00.jpg
The Temperature in the optical room has been changed.

The curve taken at 10h00 shows the stability between 21c and 22c for a time .

Another plot will be taken at the end of the day to compare.
    Reply   Temperature Regulation , posted by Manar Amer at Other about software 20212204_Temprature_Curve_Minicav_at_16h30.jpg
The Temperature curve is taken at 4:30 pm.

There is an increase in temperature by 3 degrees C after 12h00 but it seems to start decreasing around the time the curve was taken.

Will continue to monitor the temperature tomorrow too.
       Reply   Temperature Regulation , posted by Manar Amer at Other about software 20212304_Temperature_Curve_Minicav_at_10h00.jpg20212304_Temperature_Curve_Ambient_at_10h00.jpg
Continuation of the temperature monitored in the minicavity optical room:

 ---  The curve taken this morning at 10h00 showed that the rise in temperature peaked between 18h00 - 19h00 with a total increase
of ~ 4 degrees and continued to decrease up to 7h00. 
          Reply   Temperature Regulation , posted by Manar Amer at Other about software 
Information to note: During the monitoring of the temperature for today and yesterday.

There were no experiments done in the optical room and no equipment turned on.

The only equipment on at the moment are:
Entry   Alarm Panel , posted by Manar Amer at Other about software 20212304_Alarm_Panal_Notices.jpg
Alarm Panel: Monitoring of the alarms shown on the screen in the minicavity room
ELOG V3.1.4-395e101